1064nm/10.6um/355nm/532nm Laser Galvo Scanner Head Galvanometer Scanner with Double Red Beam
The input aperture is 30mm (compatible with 1064nm 355nm 532nm 10.6um lenses ), uses digital driver, fully self-developed driver/ control algorithm/ motor. Strong interference resist performance, high speed, high precision; suitable for high-precision marking, cutting and welding.,etc.
Main Features
1) High-precision grating ruler as feedback, 25-bit resolution.
2) Low noise, excellent linearity, and minimal drift.
3) Based on FPGA, the digital driver has strong interference resist ability and excellent dynamic performance.
4) Well waterproof and dustproof performance.
5) Fit a variety of kinds of F-theta lenses.
6) Successfully used for high precision marking, FPC cutting, and high-precision welding, etc.
| SPECIFICATIONS FOR 30MM EXTRAS CAN GALVO SCAN HEAD |
| Parameters | Input Aperture | 30mm |
| Beam Displacement | 35.61mm |
| 1% of full-Scale Step Response error | 1.20ms |
| 10% of full Scale Step Response Error | 4.50ms |
| Positioning Speed | 3m/s |
| Weight | 5.2kg |
| Dynamic Performance | Tracking Error | 0.70m/s |
| Repeatability | <1urad/k |
| Offset Drift | <15urad/k |
| Gain Drift | <8urad/k |
| Long-term Drift Over 8 Hours | <0.1mrad |
| Optical Performance | Typical Scan Angle | ±12.5° |
| Gain Error | <5mrad |
| Zero Offset | <5mrad |
| Nonlinearity | <0.1% |
| Power Requirements | ±15V DC, ≥3A |
| Digital Interface | XY2-100 |
| Operation Temperature | 25ºC ± 10ºC |
