1528nm~1563nm C+L band erbium-doped fiber power amplifier
The C+L band erbium-doped fiber amplifier can amplify C-band and L-band optical signals at the same time, with working wavelengths covering 1528~1563nm and 1570~1603nm, which can adapt to the signal optical wavelength and provide low-noise and high-efficiency optical power amplification.
characteristic
Wide wavelength range
Ultra-miniaturized design
Low noise
apply
Optical fiber communication
Fiber optic sensing
Fiber lasers
parameter
Wavelength ：1570nm~1605nm
Input power:：-6~+10
Saturation output power: 27/30/33/37/40
Output power adjustable range: 10%~100%
Noise figure：≤6.0dB
Polarization-dependent gain: <0.5
Polarization mode dispersion: 0.5ps
Input/output isolation:≥35dB
Optical power monitoring: input optical power monitoring, output optical power monitoring
Pigtail type and connector:SMF-28
Pigtail joint type: FC/APC
Working mode:Automatic Current Control (ACC)，/Automatic Power Control (APC)
Communication interface: DB9 Female
Electricity Desktop： 100~240V AC, <150W
Electricity module：12V DC, <60W
Desktop Size：260(W)×320(D)×120(H)mm
module Size：139(W)×235(D)×70(H)mm
Operating temperature：5 ~ 35°C
Operating humidity：0~70%
