1570nm~1605nm L-band high-power polarization-maintaining erbium-doped fiber amplifier
The high-power polarization-maintaining erbium-doped fiber amplifier is based on the principle of laser amplification of the optical signal in the erbium-doped fiber, and adopts the high-efficiency polarization-maintaining fiber optical amplification design and high-power laser heat dissipation process to achieve the high-power polarization-maintaining output of 1570~1605nm wavelength laser. It has the advantages of high power, high extinction ratio, and low noise, and can be used for optical fiber communication, lidar, etc.
characteristic
High output power
High gain factor
Fully protected polarization path
apply
Optical fiber communication
Fiber optic sensing
Laser Lidar
parameter
Wavelength ：1570nm~1605nm
Input power:：-6~+10
Saturation output power: 27/30/33/35/37/40
Output power adjustable range: 10%~100%
Noise figure：≤6.0dB
Polarization extinction ratio: 23(Type)，20(Min)
Input/output isolation:≥35dB
Optical power monitoring: input optical power monitoring, output optical power monitoring
Pigtail type and connector:PM1550
Pigtail joint type: FC/APC
Working mode:Automatic Current Control (ACC)，/Automatic Power Control (APC)
Communication interface: DB9 Female
Electricity Desktop： 100~240V AC, <150W
Electricity module：12V DC, <60W
Desktop Size：260(W)×320(D)×120(H)mm
module Size：139(W)×235(D)×70(H)mm
Operating temperature：5 ~ 35°C
Operating humidity：0~70%
