VCSEL Array Laser Diode 10W 860nm 850nm Driver circuit Included

10W 860nm 850nm VCSEL-array Laser Diode.The pulses vary from 100 microseconds up to 350 microseconds with a repetition rate of 250 Hz so in the most case the duty cycle could be close to 10%. 10W 860nm VCSEL-array Laser Diode.

The vertical-cavity surface-emitting laser, or VCSEL, is a type of semiconductor laser diode with laser beam emission perpendicular from the top surface, contrary to conventional edge-emitting semiconductor lasers (also in-plane lasers) which emit from surfaces formed by cleaving the individual chip out of a wafer. VCSEL applications include fiber optic communications, precision sensing, computer mice and laser printers.

VCSEL Laser Diode
Wavelength 860nm
Power 10W
Spectral width <0. 1nm
Divergence angle 20 degrees
Even delicate spot

Laser Medical
Laser Night Vision
Security Monitoring
Face recognition
  • -40~ +85 operating temperature
  • Large emissio area,low power density,safer
  • 200 element array
  • Modulation small emission area,easy to collimate
  • Long lifetime,>50,000hrs
  • 3D Imaging
  • Gesture Recognition
  • Laser Illumincation
  • Security surveillance
  • Medical applications
  • Broadband acesss network
  • Assisting driving advanced systems
  • IR laser curtain
  • Li-Fi transmitter
  • Range finders
  • Lindar
  • Free space optical communications
  • Military applications
Absolute Maximum Ratings

Storage Temperature: -40 to +85C
Case Operating Temperature: -40 to +85C
Relative Humidity: 5% to 9%
Reverse Power Supply Voltage: 5V
Maximum continuous forward current: 3A
ESD Exposure(Human Body Model) 1KV

Stress greater than those listed under"Absolute Maximum Rating" may cause permanent damage to the device.This is a stress rating only and function operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability.
The inherent design of this component causes it to be sensitive to electrostatic discharge( ESD). To prevent ESD-induced damage and/or degradation to equipment ,take normal ESD precautions when handing this product.


Add to Cart: