320nm Laser


Here is the list for some suppliers who can make the 320nm DPSS Lasers.

You can download the datasheets for these kinds of 320nm from different brands at the end.

 

320nm Laser Supplier Comparison

ParametersSkylarkCobolt ZydecoTM 320CNIBeamQArktislaser
Wavelength320 nm319 nm320 nm320 nm320 nm
Wavelength Accuracy ±0.3 nm±1 nm±5 nm 
Output power200 mW20 mW30 mW20 mW3-25 mW
Spectral bandwidth≤ 500 kHz<1 MHz<1 MHz<1 MHz≤ 0.5 MHz
Spatial modeTEM₀₀TEM00TEM00Near TEM00TEM00
Operational modeCW, SLMCWCWCW 
Beam height90.0 mm 27.4 mm  
Beam diameter1.0 - 1.5 mm <1.0 mm<1.0 mm0.5-1.0 mm
Beam quality: M²≤ 1.1<1.2<1.5<1.5<2
Beam divergence≤ 1.0 mrad<0.8 mrad<1.2 mrad<1.2 mrad2.0 mrad
Beam pointing stability≤ 5 µrad/°C   ≤ 5 µrad/°C
Coherence length> 100 m >50 m>50 m> 100 m
Polarization ratio≥ 100:1, vertical>100:1>100:1, Vertical>100:1, Vertical 
Spectral stability (8 hours)± 0.2 pm    
Power stability (8 hours)≤ 2.0 % pk-pk<5%<3%, <2%, <1%<3%,≤ 2.0 %
Power noise (10 Hz - 10 MHz)≤ 0.3% RMS<0.5%   

 

BeamQ 320nm Laser

CNI 320nm Laser

COBOLT 320nm laser

Skylark 320 CW DPSS laser

 

Some applications with 320nm DPSS Laser :

High-performance 320-nm continuous-wave solid-state laser

For the first time, to our knowledge, we realized a high-performance 320-nm continuous-wave (CW) laser with a fiber-coupled blue laser diode as the pump source. A V-shaped folded cavity is constituted by three mirrors, with a (Pr:YLF) as the laser crystal and a (LBO) as the frequency doubling crystal, respectively. Under an absorbed pump power of 19.5 W, the maximum 320-nm output power reaches 4.26 W, corresponding to an optical conversion efficiency of 21.8% and a root-mean-square (RMS) power fluctuation of 0.61%, which give the best results of a 320-nm CW laser up to now. The excellent performance will make this ultraviolet laser source very suitable for practical applications, including semiconductor detection, spectral analysis, microscopic imaging, and biotechnology.